Send us email
rita@gywaterjet.comCall us
+86-18736032500|
Name |
Details |
|
Model |
GYB-1-23/500 |
|
Speed |
1480 rpm |
|
High pressure pump |
Italy COMET Brand; |
|
Rate Pressure |
500 bar /7250 psi |
|
Water flow |
23 L/min |
|
Plunger dia. |
18mm |
|
Diesel Engine |
33kw, 4-Cylinder |
1.High pressure pump imported from Italy UDOR, copper pump head, ceramic plunger;
2.The pressure regulating valve is stainless steel body, alloy valve core;
3.Resistance of high temperature,high pressure, corrosion;
4.High endurance, can be used for 24 hours continuous working;
5.Pure physical cleaning without adding any chemicals
6.We have diesel engine/gasoline engine/electric motor drive for your choice
|
high pressure hose |
30M |
|
high pressure cleaning gun |
1pc |
|
High pressure nozzle |
4pcs |
|
Single hole rotating nozzle |
1pc |
|
Sandblaster nozzle |
1pc |
1.ship hull paint rust remove
2.Concrete cleaning
3.Factory oil cleaning
4.Root carving bark cleaning
5.Steel plate cleaning
High-pressure water sand blasting machine is driven by high-pressure water jets and uses a large amount of water for paint removal. Due to the large amount of water, there is less sand and no dust is generated. The large amount of water used can be directly discharged or precipitated, then filtered and reused, without causing pollution to the environment.
The 500bar hydro jetting machine is very popular among customers for its powerful functions and favorable prices. Because it can be used as a pure water high-pressure cleaning machine, it can also be used as a water sandblasting machine to deal with some stubborn stains and remove paint and rust.
When using water sandblasting, this high-pressure cleaner only needs to lower the nozzle and replace it with a special nozzle for water sandblasting, and then equip it with a sand inlet pipe and a sand tank to perform water sandblasting cleaning operations.
Sand consumption: 0.3~0.4 cubic meters per hour
Sand quality requirements: dry sand, particle size 1-3mm
Electric motor drive and diesel engine drive are available.
The angle of the nozzle and the distance from the work surface can be varied to provide the optimum working speed while still maintaining maximum impact energy. For best performance, the sand inlet hose should not exceed 5 meters.
When the sand unit is operating efficiently, there is a smooth and continuous flow of sand from the nozzle. The sand flow rate is directly related to the vacuum created in the mixing nozzle. The strength of the vacuum depends on the liquid velocity of the water.
Please contact us for free quotation by form below. We promise the quickest response within 24 hours:
